How can i change shift knobs in a suzuki car?

If you could be more specific in year and model I could help you answer your question. Late models are mostly inserted and requires pulling knob upright w/o damaging the stick shift. Older models unscrew themselves as bolts do.|||find out way to pull off old one then find out way to put on new one. like try unscrewing it or pulling it up

How to change a gear shift knob (on a 2000 Celica - don't know how to get the old one off!)?

I bought a MOMO gear shift knob. It came with instructions on how to install it. However, I have no idea how to take the old one off!





The car is a 2000 Toyota Celica|||The shift knob on your celica screws on. If you turn the shift knob counter-clockwise, it should loosen and eventually come off. You can put the replacement on by crewing it on clockwise.





Hope this helps.





Ken|||You should be able the screw the old shift knob off...

How can I take of and switch the gear shift knob of a 2007 toyota camry without ruining it?

I found a skull gear shift knob online that I want to buy for my 07 camry, I%26#039;m not sure though if the one the car came with comes off easily and I don%26#039;t want to damage it. Do you know how I can change it without ruining it?|||Turn it counter clockwise. It just screws on

How do you replace the gearshift knob on a 93 Honda Accord?

Looking to change shifting knobs. but im not sure how to remove the original.|||If it is a manual you will need to do the following:





1. You see the silver ring just below the rubber of the OEM knob? It may have worn, but it was at one point silver. Pull down on that. It will remain attached to the boot but should come unclipped from the knob. Pull hard.





2. Once that is detached, you can simply twist the knob counter-clockwise to unscrew it.





The difficulty may come in finding or modifying the stock boot to fit the knob you are putting on. In my dads 93 accord and in my 89 prelude, I just painted the numbers white and red (respectively) and left them alone.





GL!

Is there any way I can install and use a manual shift knob on an automatic vehicle?

i have a Mazda 3 08 and i always wanted to change my gear knob to something different, just wondering if i can do it or can it mess something up. please help


thanks|||People can do it, can You do it? We don%26#039;t know the answer to that question...

How do you change a gear shift knob

how do you change a gear shift knob on a 2005 mustang to a roush retro style 5-speed shift knob?|||Ford is really famous by using the press on type shift knob. You can try pulling it off, making sure you don%26#039;t smash your face with it.|||i believe they unscew but not 100 percent sure

I need a Titanium shift knob?

I%26#039;ve got a used 2007 Civic Si, and im wanting to change out shift knobs because the stock one has alot of scratches on it. If you could help me find a 6-speed titanium shift knob then i%26#039;d be very grateful. Please and thank you :)|||http://www.procivic.com/pages-main_pg/ca鈥?/a>





Pick one, personally I like the pistol grip shifters.|||Here you go. http://cgi.ebay.com/ebaymotors/2006-2007-2008-2009-2010-Honda-Si-Civic-Shift-Knob-OEM-_W0QQcmdZViewItemQQhashZitem3a5b49163dQQitemZ250639619645QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

How do i remove my shift knob?

I have a 2000 silverado 4x4 with the shift for the 4wd in the floor. How do i remove just the knob off of it to change it to a custom one?|||look at ring under knob to see if there is a set screw if not it should just twist off

How to change a gear shift knob on a manual tranmission ona1999 dodge ram?

they just screw off and on,their real easy to get on and off,some may be real tight though to get off,good luck and have a good holiday season,|||It will screw off but I believe there is a removable plug in the center %26amp; on the top of the shift knob.

How do i change the shift knob on my cobalt LS 2007 automatic?

twist to the left...dude|||look in the front of the knob and you should see a horseshoe clip that pulls out and the knob should come off.|||twist it to the left.

How do you change the stock shift knob on a 1993 240sx?

turn it counter clockwise if it%26#039;s a screw off. or else there is some kind of screw/allen head holding it on.|||turn it counter clockwise if it%26#039;s a screw off. it is most likely spin on just turn

Where can I find a genuine Toyota shift knob for a 2006 Corolla?

I bought my car used, and the manual shift knob had been replaced. I%26#039;m looking to change it back to the stock shift knob but I%26#039;m not sure where to find one without going back to a dealer and probably paying a rediculous price. Does anyone have one for sale or know where I could find one? The car has a gray interior - probably the most common color for this model. Thanks!|||Yes, the best deals on the internet for Toyota genuine parts are at 2 Toyota dealers in Texas: (i) Toyota of Dallas and (ii) Toyota of Richardson (TX) where prices are 30% of MSRP plus S%26amp;H. We have owned 5 Toyotas brand new and I have been dealing with them for years (unless it%26#039;s an emergency or small dollar value) via facsimile and/or internet and they take credit card. They ship everywhere via Big Brown UPS and might possibly ship overseas.





At both of their websites, you just specify your Toyota vehicle the Year Model etc and then it is broken down into several categories and can also provide blowup expansion diagram so you know you order right part.





Hope the Above Info Helps %26amp; Best of Luck!

How can I lower the actual shift knob in my car?

I have a 2004 Honda Civic EX, it is a manual transmission. I wanted to buy a neuspeed short shift kit for the car to reduce the shift throw, and all the reviews say it is great, however i also want the actual shift knob to sit slightly lower than stock and the short shift kit only changes the throw, not the height. is there a way to get a shorter shift lever or would a smaller shift knob lower it enough?|||Most aftermarket shifters have the actual lever as a separate piece. You could chop it, or look around and find a separate lever that%26#039;s the length you like.

Changing shift know tacoma?

I want to change the manual shift knob on my 08 tacoma. How do I take off the old one?


Are there only certain types of shift knobs that I can put on or will they all work?


How do I install the new one?|||It should twist off with a few turns. Most universal ones will work.|||Should just twist right off, however from the factory its prob screwed on there pretty tight, if not, there could be some little allen screws holding it on, yuo could put any aftermarket knob on there, they all come with adapters and such

Is it possible for me to change the shift knob in my automatic 1994 Chevrolet berretta? if so, how?

you will most likely have to order one off a web site if your trying to change the spot of the shifter like from the colum to the floor you have to get a conversion kit you may be able to get one at auto zone or something but not to likely but I would check auto part stores before going on line to save money

How do you change the shift knob on a 2004 Suzuki Aerio?

that one either screws off or it has a slip pin that you remove and it comes strait up off the shifter of it,,good luck,i hope this help,s.

Altima coupe shift knob?

Its an automatic 09 and wanted to change shift knob. Does anyone know sites where they have ones for automatics and if it%26#039;ll fit in the car? Thanks|||column or floor shifter? try sites like JC Whitney, or Ebay.

How to change the 4wd shift knob on a 2000 Silverado 1500, if you can?

ITS EASY IF YOU LOWER THE TRANSFER CASE AND PUSH THE RELEASE BUTTON ON THE FLOOR


BUT OTHERWISE MOST PEOPLE CAN JUST GO INTO THE GLOVE BOX AND PULL THE HEN THERE,DONT BE AFRAID IVE SEEN HIM BEFORE HE%26#039;S CLOGGED UNDERNEATH,JUST PUSH !

Is it hard to change a gear shift knob?

Have a Pontiac Grand Prix and my dog chewed up my leather gear shift knob. I can buy another one but is it just a matter of unscrewing the old and screwing on the new? It has a button for shifting into Reverse, etc.|||your shift knob has a U-Shaped metal clip on the front side of it. you will need to use a screwdriver to pry that clip out. keep this clip for the new knob. once the clip is out, the knob can be pulled upwards off the shaft it rests on. the knob may be wiggled around as it is being pulled up. be careful as you are pulling it up as to not break or bend the wire linkage in the knob. the wire will hook into he new knob. slide the new knob on the shaft and re-insert the metal clip. make sure everything is tight and works properly and there ya go. not too hard, but will take ten or fifteen minutes. good luck!|||ones for manual cars just screw off. never tried it in an automatic. i would imagine it%26#039;s something similar. far from difficult|||I am sure it will not be a put on - put off job. take it to a trustworthy mechanic and have it looked at first, before you buy a new gear knob. Knobs in automatics have wires and lever connected which can be quite a handful if not handled by an expert. All the best.|||SORRY IT %26quot;NOT%26quot;.... SCREW ON SCREW OFF!!!


It has a clip that needs to be removed and do watch out for flying parts %26amp; pieces|||I have an olds alero, same thing happened to me, you can pay big bucks for leather or just plastic for a lot less. smitty %26amp; wiz right on, nothing to it, look for the clip , push it out, lift it off,install new one re insert the clip the button on the side has a spring behind it, but it shouldn%26#039;t give you much trouble

How do I replace my automatic shift knob?

I have a 1995 honda civic DX and I wanna change out the factory shift knob and I have no idea how to do it. It%26#039;s an automatic, I%26#039;m not sure if I%26#039;m gonna get the style with the button on the top or the side. will that matter?|||my answer is try to check it out first on auto repair shop..|||best to just leave it...unless you can get one with thecorrect bit..

How do I change the shift knob in my 2001 Acura MDX?

loosen lock nut first then remove :)|||take the knob off and put on a new one|||same|||Yeah loosen the lock nut then remove.. lol

How to change the shift knob of a 1999 automatic mercury cougar?

There is a little pin in the factory knob on the front of the knob about in the middle of it u will need a screwdriver to get behind the pin and slide it out. once the pin is out the knob will slide right off.|||pull the roll pin out of it

How do you change a automatic shift knob on a 1996 pontiac trans am?

i like to put a pistol grip on it|||There should be an allen set screw at the base of the knob.

How to change the shift knob on 06 accord coupe 5-spd manual?

i would like to get a round shift knob, but i do not know how to remove the old knob. do i need to remove the boot? many thanks|||usually you dont have to remove the boot. see if there are any removable pieces where there might be a set screw behind.. or trytwisting... the factory put it on so if it twists off it will be very hard it could also be reverse thread too which means righty tighty lefty loosy doesnt apply its the other way around....

How can you change your manual shift change on toyota camry 1998?

so im changing my interior and i can but the shift change knob but dont know how to get the original off .. please help !|||if it is a manual than it should probably just twist off. (lefty loosey righty tighty...) however if it is an automatic, that depends on the car... i know with my automatic, i have hit a screw on the back, than twist it off.





check for screws around it, if there are any take them off, see if that helps.

How do I change the stock shift knob on a 2003 Cadillac CTS?

I am working on it right now from a laptop and Im really getting pissed at this thing. so plz help.|||Dude Just Ring Your Cadillac Service Centre and ask. saves u this mess lol

How do I remove a shift knob from chrysler sebring 2002.?

I want to change the knob but im having trouble trying to take off the shift knob because I dont know how lol|||Set the parking brake and shift the car (without starting it) to low 1. Then look at the front lower portion of the shift knob. There should be a small hole there with a set screw in it. It will be a small allen. Unscrew it till the shift knob pulls up and off.|||On a manual transmission, or gear selector without a button, the standard is usually unscrew, screwing counter-clockwise to remove.|||lefty loosey

How do you change a gear shift knob on a 2004 chevy colorado?

If it%26#039;s possible, how do you do it?|||on my 01 blazer you can take the boot off by squeeze on the leather as close as you can to the bottem and with the boot off you may see a set screw under it or on the side of the knob under the boot








it also works well to clean around it all the little bits of crap that end up there its really really really dirty around it when u pull it out lol|||If it doesn%26#039;t screw off, try looking for a %26quot;set screw%26quot; near the base of the knob.|||would be nice to know if shifter is on floor or steering column

Can you buy the original 2008 manual gear shift knob for a jeep wrangler?

I am looking to buy a used 2008 jeep wrangler, but the previous owner changed the gear shift knob. I was wondering if anyone knew of anywhere that i could find the original one to put back on there.|||only a billion junkyards have one and the Jeep Dealer can get one as well.|||GET ON EBAY/ EBAY MOTORS AND YOU SHOULD BE ABLE TO FIND ONE ON THERE!! AS A MATTER OF FACT THEY HAVE EVERYTHING ON THAT WEBSITE FOR JEEPS!!!|||You Jeep dealership should have them. Just be careful putting it on. The insides may be made of a plaster type material (like the older ones were) and if you tighten the knob down too much it will break apart and your knob will be loose and possibly mishapen.|||Try Here:


http://www.amazon.com/gp/redirect.html?i鈥?/a>


Or try searching ebay


http://rover.ebay.com/rover/1/711-53200-鈥?/a>


Good Luck

Can i change my automatic gear shift knob in my 2002 alero?

i want to change the knob in my car to a red one i have seen several on ebay that


say universal. the original in my car has a pin that looks like a staple would there


be a problem interchanging them?|||You can usually buy a shift knob at automotive parts stores. Sometimes the shift knob on your car will unscrew and you can replace it with an aftermarket one.

How do i change an automatic shift knob on a 1994 pontiac grand am?

bought a momo italian shift knob.


and do not know how to take off my old shifter knob...


also my cars a automatic, so i dont know if that makes a diffrence in anything|||pull out the clip on the front side of the shifter and pull up on the knob





Oh yeah I forgot that you need a big hammer to smash it back on.|||floor shifter pull clip on front of handle column shifter grab with vise grip and hammer off|||There will either be a set screw with an Allan or Torx type tip in it or there will be a C-clip holding it onto the shifter. Either loosen the screw or pry the clip out. Usually the screw or clip will be facing the radio so you can%26#039;t see it unless you shift the trans. to D3 when the motor is off.

Can I change the gear shift knob on my 2009 Hyundai Accent?

Most shift knobs screw off but I need a shift knob that is compatible with the lift-shifter-to-go-into-reverse set up the Accent has. I have found plenty of places that have cool shift knobs but I don%26#039;t know if they will fit. Thank you for the help.|||Yes, you can install a different shifter knob but there is a trick.





You must install a thick spacer before you put the new knob, otherwise you will not be able to lift shifter for reverse. it will hit against it.





Good luck and have fun with your Accent.|||Yes of coarse, I have a 2008 (58) Accent and I have done it No probs ! :D Cheers

How do i change my shift knob?

i have a 2003 dodge neon srt-4. i guess in most cars, the shift knobs just unscrew, but not mine. and it doesn%26#039;t have any screws or anything in the knob to loosen it. none of my friends know so i hope somebody on here can help me!|||Pull up on the knob. I found out that when power shifting with mine. No longer have that problem though because I have a MPX shifter ball on now that screws on. This is available at modernperformance.com|||Call a local dealership or look in the manual. There has to be a way to remove it. I had the same issue with a Neon before, but sold the car before i could find out! Good luck man!|||Look up at the bottom of the knob where it goes onto the stick. If there is a small hole or slot, try inserting a small screwdriver or bend out a paper clip if its a small pin hole. Push up into the hole/slot and knob should come off.|||is there a plate on the top of the shift knob? (usually has the shifting pattern on it) If so it may be that there is a small nut under the plate. might have to pry up the small piece and find the nut under it. another possibility is there may be a set screw up under the boot on the very bottom of the shift knob itself. usually a small allen head. hope it helps.|||that knob i believe you just yank up on it and it should just pop off|||apparantly it pulls off





http://www.srtforums.com/forums/f75/how-鈥?/a>


|||look in the front of the knob by the dash and you will probably see a horseshoe style push in pin that you have to pull out and then it will come off.

How do you change a shift knob on a jetta?

I cant take off the factory one. it doesnt just unscrew. does anyone know how to take it off?|||if you have 1999.5-2005 jetta you have to pull the leather shifter boot... it is held on by an elastic band so that shouldnt be too hard... then there is a clip that need to be bent until i falls down the shaft...after that the shift knob should come off





if its a newer 2006+ jetta, you have to shift into 1st or 3rd and have to push down on the boot to find the clips to undo the boot and lift it up carefully... then you can try to rip off the knob or you can loosen the bronze clip keeping the shift knob on...





while the pre 1999.5 jetta, i believe they were all screw off|||is this a stickshift or an automatic?


an automatic has a setscrew that needs loosened.


manuals usually just unscrew - counterclockwise.

1999 Ford Mustang: How do I change the shift knob?

I bought a 1999 Ford Mustang a while back and the previous owner had put a knob on the shifter that has lights and stuff - not really my style. When I bought the car, it came with the original shifter knob in the glove box, but I cannot seem to figure out how to take the current one off and replace it with the original. I have pulled up on it, tried to twist it off, tried to push down and twist... Does anyone know how to do this? Thanks.|||If it%26#039;s a manual transmission, simply lift UPWARD on the shift boot and bezel assembly, and it will snap out. Don%26#039;t forget to disconnect the wiring connector to the cigar lighter. Get a 10mm wrench to remove the to bolts that secure the shift lever to the shifter base. Remove everything as an assembly and work with it out of the vehicle. You may need to use two wrenches to loosen the aftermarket knob. The orginal knob simply screws onto the lever. Hope this helps.|||you should be able to just twist it off, they may haev tightened it on hard, so you might have to break out the tools to get it to move. good luck|||Pull up extremely hard , but watch your nose and eyes , You could hit yourself (thats how much strength it takes to get off)|||Take a look and see if there is an allen set screw that is holding the knob in position. Loosen the set screw and unscrew it.





Or you can follow Ford girls answer or do both.

How do I change the shift knob on a 2005 chevrolet cobalt?

i have a new shift knob i want to put on and I have no idea how to get my stock one off.|||Removal Procedure


Important: Place the shift control in NEUTRAL before attempting to remove the shift knob screw.





Pull the shift knob bezel down to expose the shift knob retaining screw.





Remove the shift knob retaining screw.





Remove the shift knob


and bezel from the shift control lever.





Installation Procedure





Install the bezel and shift knob to the shift control lever.





Install the shift knob retaining screw.


Tighten


Tighten the screw to 2 N路m (18 lb in).





Secure the shift knob bezel to the shift knob.





gm procedures, BEST ANSWER??|||It most likely is screwed on, but some chances are that it could have a set screw in it on the side somewhere. I%26#039;d go with choice one.

How do you remove the shift knob from a 2002 Chevy S10?

I have been trying to change the shift knob but the outer layer of the stock shift is just tearing off and the knob won%26#039;t move an inch.|||DON%26#039;T CUT ANYTHING ..............





I REPEAT, DON%26#039;T CUT ANYTHING..........





It%26#039;s very easy . key on , engine off. apply the brakes and move the shifter all the way to D or D1 .


once there, you will see a set screw on the side of the shifter ( usually a torx screw ) loosen the screw and raise the shifter knob straight up.


that%26#039;s all there is to it.|||Sounds like its junk already, so it wont hurt to cut it in half with either a hack saw, or a die grinder with a cutoff wheel in it if you have access to it. Im not sure why your taking the knob of, but it may be easiest to pull the boot down and loosen the jam nut and remove the whole shifter arm so you dont make a mess in the truck. Be carefule not to cut to far into the shaft, once you see that it has cut through the threads all the way stop. It wont hurt it to cut into some of the threads. You may be able to get away with just cutting one side of the knob, as this will relieve the pressure that was caused when it was tightened. Maybe you could replace it with a custom skull shifter, or a little pink pony wouldnt that be cute? Just kidding, good luck.|||The above answers are incorrect.





I own an 02 Chevy S-10, and I removed the knob just like he asked.





The reason it%26#039;s such a pain in the *** is because the numbnuts at Chevy glued the knob to the shifter. There were no screws involved.





You%26#039;ll see it when you cut through it. I had to cut right through the shaft just under the knob.





Yes, I cut the threads completely off. This forces you to buy a knob that is a 2-parter, one part is a ring that fits around the shaft. It is secured with 3 TINY TINY allen screws.





Then the knob itself screws down into the ring. This is the only way you can do it because the original threads are gone.





There is no other way around it. The glue they use is bonded permanantly to the shifter.








It really sucks, I know.|||You need a pick,on the forward part of the shift knob there is a clip.(resembles a staple)grab it with the pick %26amp; pull straight out.then the knob should lift right off.good luck

How do I change the shift knob on a 2000 Mercury Sable/Ford Taurus (automatic)?

I would like to change the shift knob on a 2000 automatic Mercury Sable which is identical to the Ford Taurus of that year.|||The one mounted on the steering column is not changeable it is press fit to the shift lever. I have never really tried to do so but if you really want to change it you might heat it and see if the plastic will give enough to slide it off.

Can you change the shift knob on a 2005 Ford Ranger?

I was just wondering if it is changable. I know some shift knobs can%26#039;t be changed|||here is a link that explain how to take off the shifter for an older model ford ranger. I would try the directions to see if your shifter can come off and be replaced.

How do i change shift knob on 2001 honda s2000?

I am wanting to change shift knobs but not sure how to do it|||Most shift knobs either unscrew, or have a screw going through the stock shift knob (this may be covered by a piece of plastic or something). See if either of those work.

How to change del sol automatic shift knob?

i was thinking about changing my knob because the handle is getting kind of old and worn. and since i am not used to automatics idk how to switch it because of the push button locking mechanism. is this possible or would it be easier to just eliminate the locking mechanism (locking it into open position) and going with a button-less knob?|||Do not undo the lock on your automatic shifter. Many cars require the lock to be engined in park for the car to start...





Since you have a del sol there is most likey aftermarket automatic shift knobs. If not, there are universal knobs, but all knobs will fit every car. Check parts to see if they are marked for %26quot;Honda%26quot; fitment.





If it is that bad and you can%26#039;t find a replacement, i%26#039;m sure you can get an OEM parts from parts store or dealership (ick @ dealerships for prices though). A junkyard may also be a way to find a better condition one (not to mention practice at taking the knob off without breaking the linkage).





Buttonless Knobs are for manual trans!





Good Luck!|||u cant take away the lock...and it easy to switch i just cant explain it!

Is there any way to change the shift knob of my automatic car?

I%26#039;ve seen some really nice LED shift knobs for manual cars. Is there any adapter or anything I can do to be able switch out my shift knob for one of those? I have an automatic Nissan Sentra %26#039;98. thanks.|||Most shift knobs are easy to change, just need to find out how it is attached.

How Do I Change the Shift Knob on a 2001 oldsmobile aurora?

I%26#039;m trying to customize my car a little and I can%26#039;t figure out how to change the shift knob...anyone have any ideas or suggestions? please help. =[|||If it is a console shift leaver look at the front of the lever facing the dash you will see a stapler type pin.


Take a flat screw driver and pry it out the best you can and be careful not to pull the wires of as you will lift the knob up and out. It should be in neutral to do this.


The reason for this is because you have your power shifter knob on the left of it and must be remove with care. As for what you want to do I do not know what style you want to achieve put it wont be easy to do.|||I just customized my 01 aurora shift knob. All you have to do is pull the silver piece down. Then move it into reverse so you can push the silver piece as far down as possible. You will see a clip, Start prying between the clip trying to pry the sides out a little and pull it up and off. 5-10 min

Report Abuse

|||hammer and chisel|||Typically you just have to twist (counter clockwise) REALLY hard, and it will unscrew.

How to change the shift knob on a 2006 sonata?

I want to replace my shift knob with a cool LED light up one, so how do you take the stock one off?|||you can%26#039;t , you need to take it to pet boys or the dealership, its like 30 something bucks to do

Changing a shift knob acura/honda?

i have a 97 integra ls, this might sound retarded but would any 5 spd honda or acura shift knobs fit my car? or do i have to get strictly an integra shift knob? thanks|||You better use an Integra shift knob or the Acura fairies will get after you.|||if its a manual the shift knob screws on/off and they are pretty interchangable. good luck and happy tuning.

How to change Manual shift knob on Honda Accord 92?

I have a 92 or 93 Honda Accord Manual 5 spd. I was wondering how to change the knob to a aftermarket one because the metal piece on it is starting to cut me every time i shift to 3!


THANKS IN ADVANCE!|||Unscrew it. Just grip it and start to twist. I do forget if its backwards to normal thread pattern or not. Also look at the base of the knob to ensure no set screw is in place. Be a tiny alen wrench head about 10mm wide.|||unscrew it

How to change shift knob on 1993 honda prelude?

I have a 1993 honda prelude. i have bought a new shift knob for it but am having trouble getting the knob off. Do i twist it or pull?|||you have to twist it...if that doesn%26#039;t work....remove plastic covering that goes from CD player to the hand cushion/box....after that flip the shift boot and it might have a bolt or nut|||It just twists off (Remember, Righty-tighty, Lefty-loosey).


From the factory they but red loctite on it, so it%26#039;s going to take quite a bit of elbow grease to get it off. And it has a lot of threading on it, so it%26#039;ll unscrew for quite a while :)!

Changing the shift knob on my 3000gt?

I was wondering hoe much of a hassle it is to change the shift knob does it just require to unscrew the knob and screw the new one in....? http://www.cardomain.com/item/GRE14520561 as an example... is it an easy replace? Not really mechanically inclined so yeah... thanks..|||You should just need a wrench to loosen the nut under the shift knob to get the old one loose, then you can twist it off. That%26#039;s how my car works anyway. You can then screw the new one on and tighten it with the wrench.





It also might just thread off, or at worst, you might have to remove the boot and the whole shift arm. It%26#039;s only a few bolts involved though, it really isn%26#039;t too bad even if you have to do that. I wouldn%26#039;t expect that this would be necessary, but depending on how hard it is to work with, it might make it easier to be able to work with everything out of the vehicle.|||Most either have a nut/bolt to unscrew or the whole thing just unscrews itself. Just look at it for awhile and see how it comes off. It shouldn%26#039;t really involve too much work, I don%26#039;t think you would have to dig into the car or anything.|||On a manual it%26#039;s a piece of cake on the older automatics it%26#039;s a real pain because of a switch in the knob that has two long wires that are hooked into a connector with several other wires so you have to pull the wires out of the connector with a special tool designed for dis assembling the connector. I don%26#039;t know if they still use this type of knob. The newest 3000 I have worked on is from the late 90s|||well it shood be easy it think you just unscrew it or it might have a screw on the bottom edge of the knob|||It just unscrews off and on. Lefty loosey, righty tighty. You should put some blue loctite on the threads to keep it from getting loose and spinning on the shift lever when you shift.|||yyghftghbftrghr

How to remove/change shift knob?

So I drive a 1998 saturn sl1, and have been thinking about changing the shift knob but i dont know how to take the stock one off. it has a leather sleeve on it. i know most cars will just untwist but i dont want to force anything and was wondering if anyone has done this with this saturn or a simalar model.|||for a stickshift there on pretty tight. put it in neutral and give it a good twist. its a twist off and twist on type of deal.





if its a automatic, duno never done one.

Changing shift knob in a 1998 Altima?

How hard is this task and what do I have to do? Also, what type of knob can I use, i%26#039;m attempting to customize the car.





Thanks to anyone that can help|||You generally can%26#039;t change out an automatic shift knob, due to the lockout button. Each car uses a different arrangement, and none of them are standardized. You might give your local Nissan dealer a call and see if they have something that might work. Chances are that Nismo might offer something for your car, but it%26#039;s anyone%26#039;s guess.





If it were a manual transmission, all you would need to do is turn the knob to the left and spin the old one off like a bolt and spin the new one on. Just make sure to match the thread pitch first. It will probably be M10x1.25 or M12x1.50, those are the most common ones. To find out what it is, remove the knob and take it into Lowes or any place that sells hardware and match it up using a bolt.|||.... if you dont know how to change the knob you wont get far. is it a stick or auto.. just go to advanced auto parts. they prolly sell something you would like.